LAVA A3 MINI FLASH FILE MT 6737 maevatelecom

OPPO_A11W_FLASH_FILE_MT6582_maevatelecom

Huawei R7s clone flash file Hang Logo & Dead Recovery LCD FIX 100% OK TESTED BY MAEVATELECOM.COM

This Huawei R7s clone,Firmware Will Solve Hang Logo, problem, Display Blank, Dead After Flash Recovery, Monkey Virus, Imei Null, Baseband Unknown And Other Software Issue. All ok.

আমাদের প্রতিটি ফাইল টেষ্টেট আগে আমরা কাজ করি তার পর ফাইল আপলোড করি।

• আপনি ফাইল ডাউনলোড করার আগে দেখে নিন  সেটের মডেল,
• ভার্সন এবং আমার দেয়া সেটের ছবি সহ সব তথ্য ঠিক আছে কি না !
• যদি সবকিছু মিল থাকে তাহলে ডাউনলোড করুন
• আপনার কাজটি  ১০০% সম্পর্ন হবে।
• বিঃ দ্রঃ স্যার আপনার ফোন যদি হার্ডওয়্যার জনিত সমস্যার কারনে ডেড হয় তার জন্য ফাইল সার্ভার কর্তৃপক্ষ দায়ী থাকবে না।

idm download manager maevatelecom

PEACE__PSR05pro__MT6580 FLASH FILE

Read By CM2

সেটের পিচনে ব্যাটারীর নিচে যে ইস্টিকার আছে তার সাথে মিরিয়ে ডাউনলোড করুন ১০০% কাজ হবে

INVENS E1 SP7731CEB_E1_6.0_Eager-E1_Android_6.0_V01_E1maevatelecom

Read By CM2

সেটের পিচনে ব্যাটারীর নিচে যে ইস্টিকার আছে তার সাথে মিরিয়ে ডাউনলোড করুন ১০০% কাজ হবে

Card found: S/N : F1990ABF , v0137

Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable

 ====  Wait for phone...

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ... 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : E2

Model Brand : Eager

Model Device: E2

AndrVersion : 6.0

BaseBand CPU: SP7731CEB

Project Ver : Eager-E2_Android_6.0_V01_20171219

Model Ext   : E2

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1877 MiB

Saved to : C:\Users\mdforhad\Desktop\Odin3_v3.10.7\SP7731CEB_E2_6.0_Eager-E2_Android_6.0_V01_20171219_E2\

Done!

Elapsed: 00:07:31

Reconnect Power/Cable!

RANGS S100 SPD 6531E 1000%OK maevatelecom

কল করার পর ডায়েল নাম্বার খোজে পাওয়া যায় না এই সমস্যা হলে এই ফাইলটি ডাউনলোড করুন ১০০০% কাজ হবে।

SAMSUNG S9+ COPY MT6572 FLASH FILE maevatelecom

Read By CM2

সেটের পিচনে ব্যাটারীর নিচে যে ইস্টিকার আছে তার সাথে মিরিয়ে ডাউনলোড করুন ১০০% কাজ হবে

Card found : S/N : F1990ABF , v0137

Chinese Miracle II  [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 5 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 150100534A5330304D00272F5E997F17

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ

[eMMC] : FLASH_CID : 150100534A5330304D00272F5E997F17

[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]

DEV RID    : 0x89CF3EAD2FCB3424201CBE90B4EDE470

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Clear USERDATA

Clear Ok!

Clear CACHE

Clear Ok!

Done!

Elapsed: 00:00:30

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 6 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 150100534A5330304D00272F5E997F17

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ

[eMMC] : FLASH_CID : 150100534A5330304D00272F5E997F17

[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]

DEV RID    : 0x89CF3EAD2FCB3424201CBE90B4EDE470

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

Brand     : lmkj

ProdName  : S9+

ProdModel : S9+

Device    : S9+

AndroidVer: 7.0

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_lokyee72_cwet_kk_t3.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / lokyee72_cwet_kk_t3 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 987 MiB

Scatter saved to : C:\Users\mdforhad\Desktop\CM\MT6572__lmkj__S9+__S9+__7.0__ALPS.KK1.MP7.V1\

All done!

Done!

Elapsed: 00:05:35

Reconnect Power/Cable!