PEACE__PSR05pro__MT6580 FLASH FILE

Read By CM2

সেটের পিচনে ব্যাটারীর নিচে যে ইস্টিকার আছে তার সাথে মিরিয়ে ডাউনলোড করুন ১০০% কাজ হবে

INVENS E1 SP7731CEB_E1_6.0_Eager-E1_Android_6.0_V01_E1maevatelecom

Read By CM2

সেটের পিচনে ব্যাটারীর নিচে যে ইস্টিকার আছে তার সাথে মিরিয়ে ডাউনলোড করুন ১০০% কাজ হবে

Card found: S/N : F1990ABF , v0137

Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 

3. Insert cable

 ====  Wait for phone...

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ... 

Phone found! [ 4 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : E2

Model Brand : Eager

Model Device: E2

AndrVersion : 6.0

BaseBand CPU: SP7731CEB

Project Ver : Eager-E2_Android_6.0_V01_20171219

Model Ext   : E2

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1877 MiB

Saved to : C:\Users\mdforhad\Desktop\Odin3_v3.10.7\SP7731CEB_E2_6.0_Eager-E2_Android_6.0_V01_20171219_E2\

Done!

Elapsed: 00:07:31

Reconnect Power/Cable!

RANGS S100 SPD 6531E 1000%OK maevatelecom

কল করার পর ডায়েল নাম্বার খোজে পাওয়া যায় না এই সমস্যা হলে এই ফাইলটি ডাউনলোড করুন ১০০০% কাজ হবে।

SAMSUNG S9+ COPY MT6572 FLASH FILE maevatelecom

Read By CM2

সেটের পিচনে ব্যাটারীর নিচে যে ইস্টিকার আছে তার সাথে মিরিয়ে ডাউনলোড করুন ১০০% কাজ হবে

Card found : S/N : F1990ABF , v0137

Chinese Miracle II  [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 5 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 150100534A5330304D00272F5E997F17

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ

[eMMC] : FLASH_CID : 150100534A5330304D00272F5E997F17

[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]

DEV RID    : 0x89CF3EAD2FCB3424201CBE90B4EDE470

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Clear USERDATA

Clear Ok!

Clear CACHE

Clear Ok!

Done!

Elapsed: 00:00:30

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 6 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 150100534A5330304D00272F5E997F17

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ

[eMMC] : FLASH_CID : 150100534A5330304D00272F5E997F17

[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]

DEV RID    : 0x89CF3EAD2FCB3424201CBE90B4EDE470

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

Brand     : lmkj

ProdName  : S9+

ProdModel : S9+

Device    : S9+

AndroidVer: 7.0

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_lokyee72_cwet_kk_t3.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / lokyee72_cwet_kk_t3 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 987 MiB

Scatter saved to : C:\Users\mdforhad\Desktop\CM\MT6572__lmkj__S9+__S9+__7.0__ALPS.KK1.MP7.V1\

All done!

Done!

Elapsed: 00:05:35

Reconnect Power/Cable!

SMILE Z9 (AX) LCD Problem Fix Flash File MT6572 NAND Firmware Stock Rom 1000% ok

Symphony L16 Flash file mt6261 maevatelecom

Micromax c1 FLASH FILE MT6735M 7.1 Hang Logo & Dead Recovery 100% OK TESTED BY MAEVATELECOM

Read By CM2

eMMC Flash : 510001154D333645280A0342EDD75E9B

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM36E

[eMMC] : FLASH_CID : 150100514536334D42030A289B5EC4ED

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0x89CF3EAD21F523F3AB99EAEDDA1BDA00

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [2 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

[Read Ok] : preloader_spro6737m_65_n.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : tz1.img

[Read Ok] : tz2.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / spro6737m_65_n / EMMC

Android Info saved

HWConfig Info saved

FW Size : 3330 MiB

All done!

Firmware version

MT6737M_C1_BD_Micromax C1_C1_7.0_Micromax_alps-mp-n0.mp1-V1.19_spro6737m.65.n_P73